KC
deep diveMarch 24, 20265 min read

Concrete Driveway Cost Calculator for Kansas City

Practical advice for Kansas City homeowners comparing concrete contractors.

Driveway replacement in progress, the kind of job this cost calculator prices

Planning a new concrete driveway in Kansas City? Use our comprehensive cost guide to estimate your project budget based on local KC-area pricing.

Last updated: November 2, 2026.

Updated November 19, 2026.

Step 1: Measure your driveway

Measure in feet and write each piece down separately:

ShapeHow to measureArea formula
Straight rectangleLength from the garage to where the private driveway ends × widthL × W
L-shape or side-loadSplit into two rectangles; measure each(L1 × W1) + (L2 × W2)
Flared end (wider at the garage or street)Rectangle for the main run, plus each flare as a triangleTriangle = ½ × base × height
Turnaround or parking padIts own rectangleL × W
Circle driveWalk the centerline length; multiply by the widthCenterline length × W

Do not multiply the longest length by the widest width when the driveway changes shape. An L, a flare, or a turnaround counted as one big rectangle double-counts the corners and overstates the pour. Write each piece on its own line, then add the areas. Stop the private measurement where your lot's driveway ends.

Measure the approach separately. The part of the driveway between the street and the sidewalk, sometimes farther, is usually in the public right-of-way. Cities set their own permit, inspection and construction rules for it, and contractors often price it as a separate line. Our city pages explain each city's rules: Olathe, Overland Park, Lenexa, Shawnee, Kansas City, MO, Lee's Summit, Independence, Blue Springs.

Step 2: Turn square feet into cubic yards

Concrete is ordered by the cubic yard. Contractors' quotes sometimes list it, so knowing the quantity helps you compare bids.

Cubic yards = square feet × thickness in inches ÷ 12 ÷ 27

Area4-inch slab5-inch slab6-inch slab
500 sq ft6.17 yd³7.72 yd³9.26 yd³
528 sq ft (24 × 22 two-car)6.52 yd³8.15 yd³9.78 yd³

Our arithmetic. Contractors usually order a little more than the exact volume to cover waste and an uneven subgrade, so a quote's quantity can run slightly higher than this. Use the thickness written on the quote. A 4-inch slab and a 6-inch slab are different jobs, and the table above is only comparable when the quote names the same thickness.

Thickness matters for cost and durability. Ask each contractor what thickness, reinforcement and compacted base they're pricing, and compare bids on the same specification. Our driveway cost guide explains how thickness and base prep move the price.

Step 3: Apply the rates

Use the per-square-foot rates in Base Costs below. They're the same labeled ranges as our driveway cost guide.

Worked example 1: two-car, new pour (our arithmetic, using the rates below)

24 × 22 ft = 528 sq ft. Standard gray $8-$12/sq ft gives $4,224-$6,336. Stamped at $12-$18 gives $6,336-$9,504.

Worked example 2: same driveway, replacing an old slab

Add tear-out at $2-$6/sq ft (528 sq ft = $1,056-$3,168). Standard gray replacement totals $5,280-$9,504.

Worked example 3: single lane with a turnaround, replacing

12 × 50 ft lane (600 sq ft) + 10 × 12 ft turnaround (120 sq ft) = 720 sq ft. Gray pour $5,760-$8,640 + tear-out $1,440-$4,320 = $7,200-$12,960.

These are planning ranges, not quotes. Not included: permits, approach and right-of-way work, grading and drainage fixes, thicker slab or rebar upgrades, and decorative borders.

Step 4: Check a contractor's quote against your estimate

  • Same square footage? If a quote's area is very different from your measurement, ask how they measured.
  • Same thickness and base? A cheaper quote on a thinner slab or less base isn't comparable.
  • Is tear-out included? It's often the biggest swing on a replacement.
  • Is the approach priced separately, and who handles the city permit and inspection?
  • Is the finish the same? Broom, exposed aggregate, color and stamp are different price tiers.
  • Above your range? Ask what's driving it: access, slope, drainage, demolition of thick or reinforced concrete. Those are legitimate reasons, but they should be written down.
  • Well below your range? Ask what's left out.
  • Put the quote's area, thickness, base, tear-out, approach, and finish on the same page as your estimate. Compare those lines before you compare the totals.

    When a calculator isn't the right tool

    If your driveway is sunken in places but not broken, you may not need a new slab. Compare concrete leveling or repair before pricing a replacement. If the surface is worn but the slab is sound, see resurfacing.

    Got your number? Send us the measurements and we'll connect you with a vetted local contractor for a written quote. Free for homeowners. Get a free quote

    Base Costs

  • Standard gray concrete: $8-$12/sq ft (national) (Kansas City contractor)
  • Colored concrete: $10-$16/sq ft (national)
  • Stamped concrete: $12-$18/sq ft (national) (Kansas City contractor)
  • Exposed aggregate: $10-$18/sq ft (national)
  • Tear-out/removal (replacement jobs): $2-$6/sq ft (national). A Kansas City contractor lists $2-$4.
  • Clay-soil base prep: KC contractors list $1-$3/sq ft extra (Kansas City contractor)
  • Source list: How the sources compare.

    Size Estimates

    SizeGray, new pour ($8-12)Gray, replacing existing (+$2-6 tear-out)Stamped, new pour ($12-18)Stamped, replacing existing
    Single car (200-300 sq ft)$1,600-$3,600$2,000-$5,400$2,400-$5,400$2,800-$7,200
    Two car (400-600 sq ft)$3,200-$7,200$4,000-$10,800$4,800-$10,800$5,600-$14,400
    Three car (600-900 sq ft)$4,800-$10,800$6,000-$16,200$7,200-$16,200$8,400-$21,600

    Totals are our arithmetic: square feet x the per-sq-ft rate. Planning ranges, not quotes.

    For comparison, Angi's national driveway average is $6,400 (range $2,700-$14,500); Angi's Kansas City stamped page lists $4,000-$9,000 for a 500 sq ft stamped driveway.

    How to use this

    Formula: sq ft x rate; add tear-out if replacing; add permits and extras.

    Worked example (our arithmetic): 500 sq ft standard gray replacement = removal $1,000-$3,000 + pour $4,000-$6,000 = $5,000-$9,000.

    Not included: permits, grading and drainage fixes, thicker slab or rebar, apron or street work.

    Frequently Asked Questions

    How do I calculate the cost of a concrete driveway?

    Measure the area in square feet, multiply by a per-square-foot rate for your finish, and add tear-out if you're replacing an old slab. Add permits and site work separately.

    How many yards of concrete for a two-car driveway?

    A 24 × 22 ft driveway at 4 inches thick needs about 6.5 cubic yards. At 6 inches it's about 9.8 (square feet × inches ÷ 12 ÷ 27).

    Does the calculator include the driveway approach?

    No. Approaches are usually in the city right-of-way, with their own permit and construction rules, and are often priced separately.

    KC

    KC Concrete Guide Editorial Team

    Expert guides on concrete services, costs, and contractor selection for Kansas City homeowners. Our team researches local market pricing, contractor standards, and regional considerations to help KC homeowners make informed decisions.

    Get a free quote

    Send your project details and we will connect you with a vetted local concrete contractor. Free for homeowners.

    CallGet a Quote